Last Modified: 11-29-2007 1.6 A
Service Category: Engine/Hybrid System Section: Engine Control
Model Year: 2008 Model: Sequoia Doc ID: RM000002GWK004X
Title: 2UZ-FE ENGINE CONTROL: KNOCK SENSOR: INSTALLATION (2008 Sequoia)

INSTALLATION

1. INSTALL KNOCK SENSOR

(a) Install the 2 knock sensors with the 2 nuts as shown in the illustration.

Torque: 20 N·m (204 kgf·cm, 15 ft·lbf)

(b) Connect the 2 knock sensor connectors.

2. INSTALL NO. 4 AIR INJECTION SYSTEM HOSE 2UZ-FE EMISSION CONTROL: AIR PUMP: INSTALLATION (2008 Sequoia)+

3. INSTALL WATER BY-PASS PIPE SUB-ASSEMBLY 2UZ-FE EMISSION CONTROL: AIR PUMP: INSTALLATION (2008 Sequoia)+

4. INSTALL INTAKE MANIFOLD ASSEMBLY

(a) Install the intake manifold 2UZ-FE INTAKE / EXHAUST: INTAKE MANIFOLD: INSTALLATION (2008 Sequoia) .